No products in the cart.
Product Description
Summary:
The EEA-PAM-511-A-30 is an amplifier card produced by the company Eaton Vickers. Eaton Vickers is a specialist in the manufacture of equipment and tools for hydraulic systems. The power amplifier is in a standard Eurocard form factor and is designed to be used with the ECG-02 proportional valve from Eaton Vickers.
There is a four input module and ramp function generator present on the EEA-PAM-511-A-30. The control supply output of the amplifier is 15V and the power supply input is 24V. The device accepts DC input from anywhere between 20V and 40V. If the voltage drops below 18V, the amplifier stops functioning to protect itself from possible damage. The amplifier has a ramp acceleration and deceleration ranging from 0.050 to 5 seconds. Protection against reverse polarity and short circuits are also built into the card. This means that even if a mistake is made during installation, the amplifier is not damaged. The front panel has LED indicators that provide information about things such as power status and overloads. Overloads are caused by running a higher current than the amplifier card can handle. The amplifier supports both inverting and non-inverting current as input as well.
The Eaton Vickers EEA-PAM-511-A-30 is easy to set up and install. Anyone with basic information regarding hydraulic systems and proportional valves should be able to install the amplifier with ease. The device manufacturer also provides detailed instructions regarding the full adjustment and configuration of the amplifier. Also, the amplifier is highly reliable and operates without any hiccups or malfunctions.
Manual:
Some common misspellings of EEA-PAM-511-A-30 are as follows:
EEAPAM511A30
EEA PAM 511 A 30
EEA-PAM-511-A-3O