Part Name: EEA-PAM-513-A-14
Manufacturer: Vickers
Part Series: EEA-PAM-5**-A-14 Series
For Proportional Valve: KCG-3
Power Requirements: 24V DC nominal x 40W max.
Output Voltages for Control: +15V x 50 mA max
Ramp Acceleration/Deceleration: 20 ms to 2s

SKU: e748cf45c9d2 Category:

Product Description


The EEA-PAM-513-A-14 is a power amplifier card that is part of the Vickers 14 design series. This device is manufactured by the company Eaton Vickers, who specialize in the development of advanced equipment and tools. This card is designed specifically for use with hydraulic systems. This power amplifier is meant for use with KCG-03, 10 series pressure control valves.

The device has an input module with five input sockets. Four of these are direct voltage while one is inverting. The Eaton Vickers EEA-PAM-513-A-14 has a nominal input voltage of 24V, but it can accept voltages from anywhere between 20V and 34V. However, if the voltage drops below 19V the card automatically shuts down. The amplifier has improved protection against voltage ripples. The acceptable current range for the device is from 0 to 20 mA. The control output voltage for the device is 15V. The amplifier has sufficient fortification against short circuits and damage from reverse polarity and is configured to perform an automatic reset if an overload is detected. This is effective in preventing damage to the card from an excessive current. The amplifier card also has low supply voltage protection.

On the front panel of the EEA-PAM-513-A-14 are monitoring points which enable the user to monitor the command input signal. These points, along with the LED indicators, provide a robust system to detect issues and troubleshoot. Also, the front panel allows access to controls for ramp setting, gain adjustment and deadband compensation. Another advantage of this device is that it is easy to install and does not require any maintenance.


EEA-PAM-513-A-14 Series Sheet

Some common misspellings of EEA-PAM-513-A-14 are as follows:


EEA PAM 513 A 14