The EEA-PAM-523-A-30 is a power amplifier that is produced by the company Eaton Vickers, who specializes in motion control and power equipment for applications of use such as hydraulic systems. This device is a Vickers 30 design proportional valve power amplifier. This power amplifier is meant for use with the Vickers K*G4-3/5 non-feedback valves. The power amplifier has a four input module and ramp function generator.
The input power supply of the EEA-PAM-523-A-30 is 24V DC, while the control output supply is 15V DC. The front panel of the device has LED indicators to show the power status of this device. The indicators can also show if there is an overload due to incorrect wiring. A short circuit in the amplifier can result in an over current. The front panel also allows fine adjustment of the gain. The device is also reverse polarity protected. The power amplifier supports both inverting and non-inverting input, and has a maximum voltage range of 20-40V. If the current falls below 18V, the device shuts down. The ramp deceleration and acceleration range of this amplifier is from 0.050 to 5 seconds.
The Eaton Vickers EEA-PAM-523-A-30 can be set up easily by any qualified personnel with knowledge of how proportional valves work. By following the instructions and manuals given by Eaton Vickers, the installation of these devices is easy. Detailed instructions on the adjustment procedure are provided by the manufacturer. The maintenance requirements of the amplifier are relatively low given that the device is highly reliable.
Some common misspellings of EEA-PAM-523-A-30 are as follows:
EEA PAM 523 A 30