EEA-PAM-523-B-32

AVAILABLE

Part Name: EEA-PAM-523-B-32
Manufacturer: Vickers
Part Series: EEA-PAM-5**-B-32 Series
For Proportional Valve: KD/TG4V-3, KDG5V-5/7/8/10, H coil
Power Supply Nominal Voltage: 24V DC x 50W
Control Supply Output: 15V
Ramp Acceleration Time Range: With pot. set at zero, 0 to +10V equates to a ramp time range of 50ms to 5s
Ramp Deceleration Time Range: With pot. set at max., 0 to -10V equates to a ramp time of 5s to 50 ms

SKU: ec60294de77b Category: EEA-PAM-5**-B-32 Series

Description

Product Description

Summary:

The EEA-PAM-523-B-32 is a power amplifier that is a part of the Vickers B-32 design amplifier series. This device is manufactured by Eaton Vickers, a respected specialist in the production of advanced equipment and electronics. One area that Eaton Vickers focuses on is hydraulics. This amplifier is built to be used with the K*G4V-3 and KDG5V-5/7/8 proportional valves.

The EEA-PAM-523-B-32 provides a user friendly experience and is simple to install for experienced technicians. This amplifier uses a Eurocard design that has a familiar layout for end users. The card has built-in diagnostics and uses monitoring points and LED indicators for operators to check at a glance if everything is functioning properly. There also several controls and potentiometers which allow for the adjustment of various settings like deadband compensation and gain adjustment.

The Eaton Vickers EEA-PAM-523-B-32 has a multi input module, along with a ramp function generator. The amplifier is based on the EEA-PAM-523-A-32 and shares many similarities. This card has quadrant detection which allows for the separate adjustment of acceleration and deceleration of the ramp. The amplifier has a nominal input voltage of 24V and output power supply voltage of 15V.

Manual:

EEA-PAM-5**-B-32

Some common misspellings of EEA-PAM-523-B-32 are as follows:

EEAPAM523B32

EEA PAM 523 B 32

EEA-PAM-523-B32