Part Name: EEA-PAM-533-A-32
Manufacturer: Vickers
Part Series: EEA-PAM-5**-A-32 Series
For Proportional Valve: KFD/TG4V-3
Power Supply Nominal Voltage: 24V DC x 50W
Amplifier shut-down: <18V DC
Protection: Reverse-polarity
Overload detection: Automatic reset

SKU: cb1c014ef38f Category:

Product Description


The EEA-PAM-533-A-32 is a power amplifier that is part of the Vickers 32 design amplifier card series. This amplifier is developed by Eaton Vickers and is meant for use with proportional valves in hydraulic systems. The versatile device can be used with many different proportional valves, including the KFTG4V-3, 2* and KFDG4V-3, 2* series from the same manufacturer.

One of the advantages of the EEA-PAM-533-A-32 is that it has a simple set up process that any experienced personnel can follow. If information about the install process and use of the amplifier card is needed, detailed guides are provided through the manufacturer. This card has low maintenance overhead and is durable enough that it can last for years. Monitor points and LED indicators on the device’s front panel allow for quick diagnoses of the condition and state of the device. Additionally the front panel allows access to multiple controls for the adjustment of deadband compensation and gain adjustment.

A five input module is present on the EEA-PAM-533-A-32, along with a ramp function generator. The ramp generator can be turned on or off using the ramp enable button. There are four non-inverting inputs and just one inverting input. The input power supply of the device is 24V. All output circuits are short circuit protected and the control supply is 15V. The accepted current for this device is 0-20 mA. An automatic reset is used to prevent damage from overloads. To make the device more efficient, pulse width modulation is used. The amplifier is also protected from reverse polarity.




Some common misspellings of EEA-PAM-533-A-32 are as follows:


EEA PAM 533 A 32