Part Name: EEA-PAM-535-A-30
Manufacturer: Vickers
Part Series: EEA-PAM-5**-A-30 Series
For Proportional Valve: KFG4V-3/5
Power (Input) Supply: 24V DC
Control (Output) Supplies: 15V DC
Ramp Acceleration/Deceleration: 0.050 to 5 seconds

SKU: 529302a5d8be Category:

Product Description


The EEA-PAM-535-A-30 is a proportional valve power amplifier card. This card is produced by the company Eaton Vickers and is part of the Vickers 30 design power amplifier series. Eaton Vickers is a company that focuses on power efficiency and motion control systems. Vickers, a well known company in the hydraulics industry, manufactures high quality hydraulic components. This amplifier is designed to be used with KFG4V-3/5 non-feedback proportional valves.

The Eaton Vickers EEA-PAM-535-A-30 has two ramp controls. This means that the ramp setting for acceleration in one direction will be the same in reverse. The range of adjustment for the ramp control is .050 seconds to 5 seconds. The input supply of the amplifier is 24V DC with a control supply voltage of 15V DC. This device accepts input voltages from anywhere between 20V and 40V. If the input power drops below 18V, the amplifier will turn off. Monitor points on the front of the drive are protected from short circuits. The EEA-PAM-535-A-30 has LED indicators on the front panel that actively show its state. These LEDs include power status, command control voltage, enable switch and overload detection to name a few. The amplifier is protected from overloads, which can be caused by incorrect wiring.

Installation of the EEA-PAM-535-A-30 is a straightforward process. The manufacturer has detailed manuals on the procedure of setting up the device. Additionally, the amplifier requires virtually no maintenance and is known to work for years.



Some common misspellings of EEA-PAM-535-A-30 are as follows:


EEA PAM 535 A 30