Part Name: EEA-PAM-571-A-14
Manufacturer: Vickers
Part Series: EEA-PAM-5**-A-14 Series
For Proportional Valve: CVU**-EFP1
Power Requirements: 24V DC nominal x 40W max.
Control (Output) Supplies: +15V x 50 mA max
Ramp Acceleration/Deceleration: 50 ms to 2s

SKU: 842ee7415c62 Category:

Product Description


The EEA-PAM-571-A-14 is a power amplifier card manufactured by Eaton Vickers. One area that Eaton Vickers specializes in is hydraulics. This power amplifier is a Vickers A-14 series design and is designed to work with the Vickers CVU-**-EFP1 proportional throttle valve.

The EEA-PAM-571-A-14 has an input socket module that supports both inverting and direct current. The amplifier has a 24V logic signal and a 24V nominal input voltage. The ramp function generator is enabled by default but can be disabled on the card or by using an external switch. The status of the card can be checked at a glance through LEDs on the front panel. The front panel also allows access to the potentiometers for adjustment of the deadband compensation, gain and ramp settings. This means that the amplifier can be adjusted to meet application requirements. The amplifier has a supply range from 20V to 34V and includes protection from overloads. If the voltage is to low the power amplifier shuts down to prevent possible harm.

A major selling point of the EEA-PAM-571-A-14 is how it can be installed and configured in very little time. This card does not have an elaborate set up process and is quite easy to maintain. This means that it can be managed by a relatively small crew of experienced workers.


EEA-PAM-571-A-14 Series Sheet

Some common misspellings of EEA-PAM-571-A-14 are as follows:


EEA PAM 571 A 14