The EEA-PAM-571-A-32 is a Vickers A-32 series power amplifier for proportional control valves. This device is manufactured by the company Eaton Vickers, an expert in the production of advanced equipment for hydraulics systems. This power amplifier intended for use with the CVU-**-EFP1-3* proportional control valve.
The input module for the EEA-PAM-571-A-32 has four direct current input sockets and a single inverting socket. The nominal input voltage of the amplifier is 24V DC and the output control supply is 15V. The device can accept anywhere from 20V to 40V. If the voltage falls below 18V, the amplifier will shut down as a safety measure to prevent possible damage that may occur. The device has an acceptable current range from 0 to 20 mA and has an automatic reset function to protect the device from overloads. Overloads can be caused by improper wiring. If this happens, the amplifier cannot be used until the problem is successfully resolved.
The installation process of the EEA-PAM-571-A-32 is quite user friendly as anyone with sufficient experience regarding proportional valves should be able to easily set it up. The amplifier device has a standard Eurocard design and is protected against many common malfunctions. The amplifier card is protected from short circuits and reverse polarity. This amplifier also has several front panel LEDs and controls. These allow the user to diagnose any problems and tweak the settings of the device so that it suits the user’s need perfectly.
Some common misspellings of EEA-PAM-571-A-32 are as follows:
EEA PAM 571 A 32