No products in the cart.
Product Description
Summary:
The EEA-PAM-553-A-30 is a power amplifier card that is designed and manufactured by the power management company Eaton. Vickers, a respected name in hydraulics, became part of the Eaton family in 1999. This amplifier is intended to be used with the KSDG4V-3 proportional valve. The device is part of the Vickers 30 design power amplifier series.
This power amplifier accepts a DC input range of 20V to 40V with a nominal input supply voltage of 24V and output supply voltage of 15V. If the input voltage drops below 18V the device turns off due to insufficient voltage. A ramp function generator, which controls acceleration and deceleration, allows a range of adjustment from .050 to 5 seconds. The LED indicators, present on the amplifier’s front panel, provide a detailed outlook on the current state of the device. There are indicators for power status, overload detection and internal or external short. Overloads may be caused by improper setup of the amplifier, such as how it is wired. The front panel also has controls for gain settings.
Setting up the Eaton Vickers EEA-PAM-553-A-30 is an easy process. By following directions provided by the card’s manufacturer, anyone, even with little knowledge about proportional valves and hydraulics, should be able to install the device. Another advantage of the amplifier is its durability and reliability, which, with proper care, can last for a significant period of time.
Manual:
Some common misspellings of EEA-PAM-553-A-30 are as follows:
EEAPAM553A30
EEA PAM 553 A 30
EEA-PAM-553-A-3O