Part Name: EEA-PAM-568-A-30
Manufacturer: Vickers
Part Series: EEA-PAM-5**-A-30 Series
For Proportional Valve: KFDG5V-8
Power (Input) Supply: 24V DC
Control (Output) Supplies: 15V DC
Ramp Acceleration/Deceleration: 0.050 to 5 seconds

SKU: 88c8a9f8f289 Category:

Product Description


The EEA-PAM-568-A-30 is an amplifier card that is part of the Vickers 30 design power amplifier series. This device is built by the hydraulics equipment and accessories manufacturer, Eaton Vickers. The card is designed to be used with the KFDG5V-8 that is also produced by Eaton Vickers.

The Eaton Vickers EEA-PAM-568-A-30 possesses an input module as well as a ramp function generator. The ramp acceleration and deceleration adjustment time of the device ranges from 0.050 to 5 seconds. The output control voltage of the amplifier card is 15V DC, while its input power supply is 24V DC. The amplifier accepts voltage within a range between 20V and 40V. At less than 18V, the card may turn off because of an inadequate operating voltage. The front panel provides an array of tools that allows for monitoring and optimizing of the amplifier. There are LED indicators for power status, drive status, overloads and output power. The overload indicator may turn on if there is any fault in the wiring of the device. The power amplifier is also protected from short circuits and reverse polarity.

Installation of the EEA-PAM-568-A-30 is relatively simple. Even someone with minimal knowledge can install this amplifier with the provided manuals and instructions from the manufacturer. The device is durable enough that it does not require frequent repairs and maintenance.



Some common misspellings of EEA-PAM-568-A-30 are as follows:


EEA PAM 568 A 30